Our products
HP OneLam 400 A3, Laminating speed 400mm/min, Laminating size mini credit card-max 330mm, 3161
HP OneLam 400 A3
The HP OneLam 400 A3 has a fold-out lid, which not only serves as a practical insertion aid, but also makes the device a particularly space-saving companion. The practical backloader is suitable for hot and cold lamination and can be used for laminating films with a thickness of 75/80 to 125 microns. Whether you want to protect recipes, photos or children's drawings from wear and tear, the laminator seals your documents regardless of format, from business cards up to DIN A3.
Key facts
The modern HP OneLam 400 A3 has an intuitive function button that sets the required temperature based on the selected film thickness and this reliable assistant heats up in 2-4 minutes.
A cutting ruler, corner scraper and a 15-piece starter set consisting of three A4, four A5, four A6 and four business card sheets is supplied so that you can begin your laminating project right away. The cutting ruler and the corner scraper can be stored in a handy compartment underneath the device so that you always have the accessories at hand.
With a speed of 400 millimetres per minute, the HP OneLam 400 A3 therefore laminates an A3 document in about 60 seconds. If you have inserted the film into the laminator at an angle, this can lead to a film jam. Thanks to the roller release lever, the film can be carefully released and pulled out on the input side and the foil jam rectified.
If you forget to switch off the device via the main switch, the heating process is stopped after 30 minutes and the laminator switches to standby mode.
Device
• Range of application: private households / hobby requirements, office workstations
• Laminating formats: from business cards to DIN A3 format
• Warm-up time: 2 - 4 minutes for 80 microns
• Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
• Application: Hot and cold lamination
• Laminating speed: 400 mm per minute
• Backloader: fold-out lid as insertion aid on the rear side
• Temperature: 120 - 150 degrees celsius
• Heating system: 2 rollers are heated from the inside
• Input width: 330 mm
• Colour: white
Accessories
• Cutting ruler
• Corner scraper
• 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
Functions
• Function Button: On/off, 75/80 microns, 125 microns, cold
• Temperature controlled: each film thickness has its own temperature
• Automatic standby mode: after 30 minutes
• ABS function: roller release lever
Operating conditions
• Voltage: 220 - 240 V
• Frequency: 50 / 60 Hz
• Power: 400 W / 1.74 A
• Motor type: AC
Logistics
• Item number: 3161
• EAN: 4030152031610
• Device dimensions: 460 mm x 140 mm x 86 mm (width x depth x height)
• Device weight: 1.77 kg
HP OneLam 400 A4, Laminating speed 400mm/min, Laminating size mini credit card-max 230mm, 3160
HP OneLam 400 A4
The HP OneLam 400 A4 is a compact laminator for versatile use in the hobby sector and home office and fits neatly on any desk. This modern laminator is suitable for both hot and cold lamination and seals your documents from business cards up to A4 format. An intuitive function button is used to set the required temperature based on the film thickness and this modern assistant is ready for use in 2-4 minutes. A cutting ruler, corner scraper and a 15-piece starter set consisting of three A4, four A5, four A6 and four business card sheets is supplied so that you can begin your laminating pleasure right away. The cutting ruler can be stored in a handy compartment underneath the device so that you always have the accessories at hand.
Key facts
With the reliable HP OneLam 400 A4 not only can you laminate your recipes, photos or children's drawings, but also playing cards or bicycle maps, as long as they are no thicker than 0.5 mm including the laminating foil.
The laminator in white design works at a speed of 400 millimetres per minute and therefore seals a DIN A4 document in a maximum of 45 seconds. The fold-out lid not only serves as a practical insertion aid but also makes the laminator a particularly space-saving companion.
The practical backloader is suitable for laminating films with a thickness of 75/80 microns up to 125 microns.
In addition to the main on and off switch and the function button, the laminator also has a lever for roller release: If you have inserted the film into the laminator at an angle, this can lead to a film jam. After unlocking, the laminating foil can be carefully released on the input side and the foil jam is rectified.
Have you accidentally forgotten to switch the laminator off? No problem, the HP OneLam 400 A4 automatically switches to standby mode after 30 minutes and stops the heating process.
Device
• Range of application: private households / hobby requirements, office workstations
• Laminating formats: from business cards to DIN A4 format
• Warm-up time: 2 - 4 minutes for 80 microns
• Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
• Application: hot and cold lamination
• Laminating speed: 400 mm per minute
• Backloader: fold-out lid as insertion aid on the rear side
• Temperature: 120 - 150 degrees Celsius
• Heating system: 2 rollers are heated from the inside
• Input width: 230 mm
•Colour: white
Accessories
• Cutting ruler
• Corner scraper
• 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
Functions
• Function Button: On/off, 75/80 microns, 125 microns, cold
• Temperature controlled: each film thickness has its own temperature
• Automatic standby mode: after 30 minutes
• ABS function: roller release lever
• The operating conditions
• Voltage: 220 - 240 V
• Frequency: 50 / 60 Hz
• Power: 400 W / 1.74 A
• Motor type: AC
Logistics
• Item number: 3160
• EAN: 4030152031603
• Device dimensions: 380 mm x 123 mm x 81 mm (width x depth x height)
• Device weight: 1.35 kg
HP OneLam Combo A3, Laminating speed 400mm/min, Laminating size mini credit card-max 330mm, 3162
HP OneLam Combo A3
Compared to the HP OneLam 400 A3, the HP OneLam Combo A3 scores with an integrated cutter, which makes it even easier to cut your documents in straight, curled or perforated format. Through use of the angle presets and centimetre grid, your laminated documents can easily be cut to the desired size. Like the other laminators in the HP OneLam range, this handy backloader is suitable for both hot and cold lamination. With a film thickness of 75/80 to 125 microns, you can protect your pictures, timetables or important documents from business cards up to A3 format from dirt and moisture.
Key facts
An intuitive function button on the HP OneLam Combo A3 is used to set the required temperature. After selecting the film thickness, this modern backloader is ready for use in 2-4 minutes.
The integrated roller cutter, the corner scraper, and the 15-piece starter set, consisting of three A4, four A5, four A6 and four business card foils, all ensure immediate laminating fun. The corner scraper can be stored in a practical compartment under the device so that you always have the accessories at hand.
The all-rounder laminates at a speed of 400 millimetres per minute, which corresponds to just over 60 seconds for an A3 document.
Have you accidentally inserted the film with the laminating document at an angle and a paper jam has occurred? No problem, because by pressing the roller release lever, the film is released and can be carefully pulled out on the input side.
If you forget to switch off the HP OneLam Combo A3 at the main switch, the reliable helper automatically switches to standby mode after 30 minutes.
Device
• Area of application: private households / hobby requirements
• Laminating formats: from business cards to DIN A3 format
• Warm-up time: 2 - 4 minutes for 80 microns
• Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
• Application: Hot and cold lamination
• Laminating speed: 400 mm per minute
• Temperature: 120 - 150 degrees celsius
• Heating system: 2 rollers are heated from the inside
• Input width: 330 mm
• Colour: white
Accessories
• Integrated cutter for straight, corrugated or perforated cuts
• Corner scraper
• 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
Functions
• Function Button: On/off, 75/80 microns, 125 microns, cold
• Temperature controlled: each film thickness has its own temperature
• Automatic standby mode: after 30 minutes
• ABS function: roller release lever
Operating conditions
• Voltage: 220 - 240 V
• Frequency: 50 / 60 Hz
• Power: 400 W / 1.74 A
• Motor type: AC
Logistics
• Item number: 3162
• EAN: 4030152031627
• Device dimensions: 460 mm x 158 mm x 115 mm (width x depth x height)
• Device weight: 1.65 kg
HP OneShred 10MC, Shred capacity (sheets A4, 80g) x10, Bin capacity L20, Color White, 2804
HP OneShred 10MC
The reliable HP OneShred 10MC shreds up to 10 A4 sheets at a time to 2 mm x 15 mm clippings in micro-cut mode and has the high security level P-5. This modern document shredder thus fulfils all requirements for the data protection-compliant destruction of personal data, such as patient files and process documents, and is therefore also suitable for use in doctors' surgeries or law firms. With an operating noise level of 65 decibels, the white paper shredder operates relatively quietly and, in addition to your documents and credit cards, also destroys paper clips and staples to dispense with their tedious removal before shredding.
Key facts
In addition to ease of use, the HP OneShred 10MC features an automatic start-stop function, an overheat and overload indicator, and an automatic reverse function in case you accidentally feed more than 10 sheets at a time.
If the practical helper has been in continuous use for 10 minutes, you should allow a cool down period so that it does not overheat. The HP OneShred 10MC is equipped with four castors so that it is readily mobile and can be used wherever it is needed.
The viewing window on the waste bin, which has a capacity of 20 litres, means you can always see when the box needs emptying. Since it can be easily pulled out, emptying is quick and easy.
In addition to the clippings collection bin, instruction manual and power cord, the HP OneShred 10MC also comes with a HP Shredder Oil Sheet for initial cleaning of the cutting unit.
Cutting unit
• Cutting capacity: 10 sheets DIN A4 (80 g / m²)
• Type of cut: Micro cut / Micro cut
• Particle size: 2 mm x 15 mm
• Cutting speed: 1.6 metres per minute
• Material to be cut: paper, credit cards, paper clips and staples
Security
• Security level: P-4 / DIN 66399
Device
• Application area: small office environment / doctors / law firms
• Operating time: 10 minutes
• Cooling time: 50 minutes
• Waste container: 20 litres pull-out with viewing window
• Feed width: 220 mm
• Operating noise: 65 dB
• Castors: 4, 2 of them lockable
• Colour: white
Indicators
• Overheat indicator: yes
• Overload indicator: yes
• Anti-paper jam technology: through automatic return function
• Full and open bin indicator: no
Operating conditions
• Voltage: 220 - 240 VAC
• Frequency: 50 / 60 Hz
• Power: 350 W / 1.8 A
• Motor type: DC
Logistics
• Item number: 2804
• EAN: 4030152028047
• Device dimensions: 354 mm x 240 mm x 534 mm (width x depth x height)
• Device weight: 9.4 kg
HP OneShred 12CC, Shred capacity (sheets A4, 80g) x12, Bin capacity L23, Color White, 2802
HP OneShred 12CC
The compact HP OneShred 12CC cross-cuts your sensitive documents into 4mm x 35mm clippings and belongs in every home office. The reliable paper shredder impresses with the high security level P-4 and thus meets the requirements of the Basic Data Protection Regulation for the destruction of personal documents. With a cutting speed of 1.8 metres per minute, this modern document shredder quickly shreds up to 12 sheets at a time in particle cut. If you have accidentally fed in more than 12 sheets, the paper is automatically fed back thanks to the auto-reverse function that counteracts paper jams. There's no need to tediously remove staples and paper clips before shredding, as they give the HP OneShred 12CC as little trouble as credit cards.
Key facts
The intuitive operation, the practical start-stop function and the overheating and overload indicator ensure an easy and safe shredding experience. After a six-minute shredding session, the HP OneShred 12CC requires a cool down period before returning to full power. With a weight of 5.9 kg and dimensions of 345 mm x 485 mm (width x height), this handy shredder is easy to transport even without castors.
The waste bin has a capacity of 23 litres. To empty, lift the shredder head from the waste bin, empty the box and simply replace the attachment until you hear it click into place.
Even without a technical fill level indicator, the viewing window on the waste bin alerts you when it needs empytying.
The HP OneShred 12CC comes equipped with a waste bin and user manual, as well as a HP Shredder Oil Sheet for initial cleaning of the shredding head.
Cutting unit
• Cutting capacity: 12 sheets DIN A4 (80 g / m²)
• Type of cut: Particle cut / Cross cut
• Particle size: 4 mm x 35 mm
• Cutting speed: 1.8 metres per minute
• Material to be cut: paper, credit cards, paper clips and staples
Security
• Security level: P-4 / DIN 66399
Device
• Area of application: Private household / Home office
• Operating time: 6 minutes
• Cooking time: 50 minutes
• Waste bin: 23 litres with removable shredder head and viewing window
• Feed width: 220 mm
• Operating noise: 65 dB
• Rollers: none
• Colour: white
Indicators
• Overheat indicator: yes
• Overload indicator: yes
• Anti-paper jam technology: through automatic return function
• Full and open bin indicator: no
Operating conditions
• Voltage: 220 - 240 VAC
• Frequency: 50 / 60 Hz
• Power: 300 W / 1.4 A
• Motor type: DC
Logistics
• Item number: 2802 / 2810 for the UK version
• EAN: 4030152028023 / 4030152028108 for the UK version
• Device dimensions: 345 mm x 235 mm x 485 mm (width x depth x height)
• Device weight: 5.9 kg
